Ricoh G188 Service Manual page 424

Engine Service Mode
019 Tray: Thick 1:1200
020 By-pass: Plain:1200
021 By-pass: Middle Thick:1200
022 By-pass: Thick 1:1200
023 Duplex: Plain:1200
024 Duplex: Middle Thick:1200
025 Duplex: Thick 1:1200
[Side to Side Reg.] Side-to-Side Registration Adjustment
1002
Adjusts the side-to-side registration by changing the laser main scan start
position for each mode.
001 By-pass Table
002 Paper Tray 1
003 Paper Tray 2
004 Paper Tray 3
005 Paper Tray 4
006 Duplex
008 Large Capacity Tray
[Paper Buckle] Paper Buckle Adjustment
(Tray Location, Paper Type), Paper Type: N: Normal, TH: Thick
1003
Adjusts the amount of paper buckle at the registration roller by changing the
paper feed timing.
002 Paper Tray1: Plain
003 Tray1: Middle Thick
G188/G189
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
[–4 to 4 / 0.0 / 0.1 mm/step]
*ENG
*ENG
*ENG
*ENG
*ENG [–9 to 5 / -2 / 1 mm/step]
*ENG [–9 to 5 / -1 / 1 mm/step]
8-12 SM Appendix