Ricoh G188 Service Manual page 623

Rev. 05/21/2009
209 Instl Clear
250 CommLog Print
5821 [Remote Service Address]
002 RCG IP Address
⇒
[NV-RAM Data Upload] (Refer to IMPORTANT NOTE in Sect. 5.4)
Uploads the UP and SP mode data (except for counters and the serial
5824
number) from the NVRAM to an SD card. For details, see the "NVRAM Data
Upload/Download" in Sect. 5.4).
001 NV-RAM Data Upload
[NV-RAM Data Download]
5825
Downloads the UP and SP mode data from an SD card to the NVRAM. For
⇒
details, see the "NVRAM Data Upload/Download" in Sect. 5.4).
001 NV-RAM Download
SM Appendix
-2394 Device not managed
-2395 Box ID for RCG device is illegal
-2396 Device ID for RCG device is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
Releases the machine from its Embedded RCG
Gate setup.
NOTE: Turn off and on the main power switch after
this setting has been changed.
Prints the communication log.
Sets the IP address of the RCG (Remote
*CTL Communication Gate) destination for call
processing at the remote service center.
# -
# -
8-211
Engine Service Mode
G188/G189