Ricoh G188 Service Manual page 544

Engine Service Mode
Additional Time
001
Adjusts the additional time for ending the machine's process.
2970 [Cleaning After JOB]
001 No Refresh
002 Refresh
2971 [T1 Non Image Area ON Timing]
-
001
Adjusts the timing for the non-image area bias of the image transfer roller.
SP3-XXX (Process)
3011 [Process Cont. Manual Execution]
001 Normal
002 Density Adjustment
003 Pre-ACC
004 Full MUSIC
G188/G189
*ENG
[0 to 10 / 0 / 1 sec/step]
[0 or 1 / 0 / 1 /step]
*ENG
0: No cleaning, 1: Cleaning
[0 or 1 / 1 / 1 /step]
*ENG
0: No cleaning, 1: Cleaning
[–270 to 180 / P2c: 10/ P2d: 20 / 10
*ENG
msec/step]
Executes the normal process control
manually (potential control).
-
Check the result with SP3-325-001 and
3-012-001 after executing this SP.
Executes the toner density adjustment
-
manually.
Executes the process control that is
normally done before ACC.
-
The type of process control is selected with
SP3-041-004.
- Executes the process control that is
8-132 SM Appendix