Ricoh G188 Service Manual page 595

5113 [Optional Counter Type]
Default Optional Counter
001
Type
External Optional
002
Counter Type
5114 [Optional Counter I/F]
001 MF Key Card Extension
5118 [Disable Copying]
001 This program disables copying.
[Mode Clear Opt.
5120
Counter Removal]
This program updates the information on the optional counter. When you install
001
or remove an optional counter, check the settings.
5121 [Counter Up Timing]
This program specifies when the counter goes up. The settings refer to "paper
001
feed" and "paper exit" respectively.
SM Appendix
This program specifies the counter type.
0: None, 1: Key card (RK 3, 4)
2: Key card (down), 3: Prepaid card
*CTL
4: Coin rack, 5: MF key card
8: Key counter + Vendor
9: Bar-code Printer
This program specifies the external counter
type.
0: None
*CTL
1: Expansion Device 1
2: Expansion Device 2
3: Expansion Device 3
[0: Not installed/ 1: Installed (scanning
*CTL
accounting)]
*CTL [0: Not disabled/ 1: Disabled]
[0: Yes (removed)/ 1: Standby (installed
*CTL
but not used)/ 2: No (not removed)]
*CTL [0: Feed/ 1: Exit]
8-183
Engine Service Mode
G188/G189