Ricoh G188 Service Manual page 426

Engine Service Mode
1007 [By-Pass Size Detection] By-Pass Size Detection Display
LG
Enables or disables the automatic paper size detection function of the by-pass
tray.
001
This SP determines what paper size the machine detects if the detected size is
less than 8.5".
0: OFF (Letter/SEF), 1: ON (Legal/SEF)
1103 [Fusing Idling] Fusing Idling Adjustment
Extra Idling Time
001
Specifies how long the extra idling operation is executed.
014 Minimum Idling Time
016 Extra Idling Time (L)
017 Extra Idling Time (H)
018 Extra Idling Time (M)
019 Pressure TempThreshold
[Idling Before Job]
Paper Type -> Plain, Thin, Thick, OHP, Middle Thick, Special
Pressure Temp: Pressure Roller Temperature
Feed or Fusing Temp: Heating Roller Temperature
1104
Specifies the threshold temperature for the paper feed waiting in each mode.
The machine does not feed paper until the temperature of the pressure or
heating roller reaches temperatures specified by the following SPs.
G188/G189
*ENG
[0 or 1 / 0 / - ] 0: OFF, 1: ON
*ENG
[0 to 60 / 0 / 1 sec/step] Not used
*ENG [0 to 10 / 0 / 1 sec/step]
Specifies how long the extra idling
operation is executed for each
environment.
*ENG
[0 to 250 / 70 / 1 sec/step]
Each environment is determined with
SP1112-001 and 002.
*ENG
[0 to 250 / P2c: 20, P2d: 35 / 1 sec/step]
*ENG
*ENG [10 to 200 / 180 / 1 deg/step]
8-14 SM Appendix