Ricoh G188 Service Manual page 533

Paper Transfer: Plain: 2nd Side:
014
S4
Paper Transfer: Plain: 1st Side:
017
S5
Paper Transfer: Plain: 2nd Side:
018
S5
[Special 2: Leading Edge Correction] Special 2 Paper: Leading Edge
Correction
Adjusts the correction to the paper transfer roller current at the paper leading
2821
edge in each mode. SP2803 and SP2807 are multiplied by these SP values.
Plain: 205 (P2c)/230 (P2d) mm/sec, 1200: 77 mm/sec
The paper leading edge area can be adjusted with SP2822.
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: 1200: 1st Side
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2801 is multiplied by these SP values.
2821
The paper leading edge area can be adjusted with SP2822.
005 Separation DC: Plain: 1st Side
006 Separation DC: Plain: 2nd Side
007 Separation DC: 12001st Side
2822 [Special 2: Switch Timing: Lead. Edge]
SM Appendix
(Paper width)
[100 to 600 / 220 / 5%/step]
210 mm ≥ S4 size ≥ 148 mm
*ENG
(Paper width)
[100 to 600 / 180 / 5%/step]
*ENG
148 mm ≥ S5 size (Paper width)
[100 to 600 / 180 / 5%/step]
*ENG
148 mm ≥ S5 size (Paper width)
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
8-121
Engine Service Mode
G188/G189