Ricoh G188 Service Manual page 456

Engine Service Mode
004 Temperature
005 Relative Humidity
006 Absolute Humidity
007 Temp Threshold M
008 RH Threshold M
009 AH Threshold M
010 Temp Threshold S
011 RH Threshold S
012 AH Threshold S
013 Non-use Time
2015 [Charge AC Adj: Result]
001 Bk
002 M
003 C
004 Y
[Color Registration Correction] FA
These values are the parameters for the automatic line position adjustment and
are adjusted at the factory. However, you must input a value for SP2101-001
2101
after replacing the laser optics housing unit. For details, see "Laser Optics
Housing Unit" in the "Replacement and Adjustment" section. The value should
be provided with the new laser optics housing unit.
001 Main Dot: Bk
002 Main Dot: M
G188/G189
*ENG
[0 to 99 / 25 / 1 deg/step]
*ENG
[0 to 99 / 50 / 1 %RH/step]
*ENG [0 to 99 / 12 / 1 g/m
*ENG [0 to 99 / 10 / 1 deg/step]
*ENG
[0 to 99 / 50 / 1 %RH/step]
*ENG [0 to 99 / 6 / 1 g/m
*ENG [0 to 20 / 1 / 0.1 deg/step]
*ENG [0 to 50 / 5 / 1 %RH/step]
*ENG
[0 to 20 / 1 / 0.1 g/m
*ENG [0 to 1440 / 360 / 10 min/step]
*ENG
[0 to 9 / 0 / 1 /step]
0: Success
*ENG
1: Out of tolerance range
*ENG
2: Out of adjustable range
3: Adjustment incompleted
*ENG
*ENG [–512 to 511 / 0 / 1 dot/step]
*ENG
8-44
3
/step]
3
/step]
3
/step]
SM Appendix