Ricoh G188 Service Manual page 361

No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Delete All error 1: HDD
An error is detected while all of the HDD or NVRAM are formatted
physically by the Data Overwrite Security Unit (M354).
CTL
874
Data Overwrite Security Unit (SD card) not installed
D
Defective HDD
1. Install the Data Overwrite Security Unit (M354).
2. Replace the HDD.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Delete All error 2: Data area
An error is detected while all of the HDD or NVRAM are formatted
CTL
logically by the Data Overwrite Security Unit (M354).
875
D
The logical format for the HDD fails.
Turn the main switch off/on and try the operation again
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Log Data Error
CTL An error was detected in the handling of the log data at power on or
876
D during machine operation. This can be caused by switching the
machine off while it is operating.
Log Data Error 1
-001
Damaged log data file in the HDD
Initialize the HDD with SP5832-004.
-002 Log Data Error 2
An encryption module not installed
SM Appendix
Service Call Conditions
3-65 G188/G189