Mounting An Ex4300 Switch On Four Posts Of A Rack Or Cabinet - Juniper QFX5110 Series Hardware Documentation

7. Have a second person secure the switch to the rack by using the appropriate screws. Tighten the
screws.
8. Ensure that the switch chassis is level by verifying that all screws on one side of the rack are aligned
with the screws on the other side.
NOTE: We recommend that you install cover panels in the unused uplink module and power
supply slots.
RELATED DOCUMENTATION
Rack-Mounting and Cabinet-Mounting Warnings | 224

Mounting an EX4300 Switch on Four Posts of a Rack or Cabinet

You can mount an EX4300 switch on four posts of a 19-in. rack or a 19-in. cabinet by using the separately
orderable four-post rack-mount kit. (The remainder of this topic uses rack to mean rack or cabinet.)
You can mount the switch on two posts of either a two-post rack or a four-post rack by using the mounting
brackets provided with the switch. See
on page 356.
NOTE: If you need to mount the switch in a recessed position on either a two-post rack or a
four-post rack, you can use the 2-in.-recess front-mounting brackets provided in the separately
orderable four-post rack-mount kit.
"Mounting an EX4300 Switch on Two Posts of a Rack or Cabinet"
359