Mounting An Ex2300 Switch On A Desk Or Other Level Surface - Juniper EX2300-C Hardware Manual

Table 54: EX2300 Switch Mounting Methods (continued)
Mounting Method
Four-post rack or cabinet
Recessed position
Related
Documentation

Mounting an EX2300 Switch on a Desk or Other Level Surface

Copyright © 2017, Juniper Networks, Inc.
Switch Model
EX2300-C
EX2300
EX2300
The holes in the mounting brackets are placed 1 U (1.75 in. or 4.45 cm) apart so that the
switch can be mounted in any rack or cabinet that provides holes spaced at that distance.
Mounting an EX2300 Switch on a Desk or Other Level Surface on page 129
Mounting an EX2300-C Switch Under a Desk or Other Level Surface by Using Screws
on page 131
Mounting an EX2300 Switch on a Wall on page 141
Mounting an EX2300-C Switch on or Under a Surface Made of Ferrous Material on
page 149
Mounting an EX2300 Switch on Two Posts of a Rack or Cabinet on page 135
Mounting an EX2300 Switch on Four Posts of a Rack or Cabinet on page 137
Mounting an EX2300 Switch in a Recessed Position in a Rack or Cabinet on page 153
Connecting Earth Ground to an EX Series Switch on page 155
You can mount an EX2300 switch on a desk or other level surface by using the four rubber
feet that are preinstalled on the switch. The rubber feet stabilize the chassis.
Before mounting the switch on a desk or other level surface:
Verify that the site meets the requirements described in
for EX2300 Switches" on page
Place the desk in its permanent location, allowing adequate clearance for airflow and
maintenance, and secure it to the building structure.
Read "General Safety Guidelines and Warnings" on page
to "Chassis Lifting Guidelines" on page
More Information
On two posts in a 19-in. rack-mounting brackets or cabinet by using
the separately orderable two-post rack-mounting brackets
On four posts in a 19-in. rack-mounting brackets or cabinet by using
the separately orderable four-post rack-mount kit
In a position recessed 2 in. from the front of a 19-in. rack or cabinet
by using the 2-in.-recess front-mounting brackets in the separately
orderable four-post rack-mount kit. You can mount the switch in this
recessed position on two-post or four-post racks and cabinets.
51.
232.
Chapter 12: Installing the Switch
"Site Preparation Checklist
223, with particular attention
129