Pluggable Transceivers Supported On Ex Series Switches - Juniper EX2300-C Hardware Manual

Table 40: Optical Interface Support for SFP+ Transceivers in EX2300 Switches (continued)
Ethernet Standard Specification
10GBASE-ZR Model number
NOTE: EX2300-C
Rate
switches do not
support this
Connector type
transceiver.
Fiber count
Transmitter wavelength
Minimum launch power
Maximum launch power
Minimum receiver sensitivity
Maximum input power
Fiber type
Core/Cladding size
Modal bandwidth
Distance
DOM support
Software required
Support for Virtual Chassis
configuration
Related
Documentation

Pluggable Transceivers Supported on EX Series Switches

Copyright © 2017, Juniper Networks, Inc.
EX2300 Switches Hardware Overview on page 3
Installing a Transceiver on page 193
Removing a Transceiver on page 195
The transceivers for EX Series switches are hot-removable and hot-insertable
field-replaceable units (FRUs): You can remove and replace them without powering off
the switch or disrupting switch functions.
Chapter 8: Transceiver and Cable Specifications
Value
EX-SFP-10GE-ZR
10 Gbps
LC
Dual
1550 nm
0 dBm
5 dBm
–20 dBm
–8 dBm
SMF
9/125 µm
–
80 km (49.7 miles)
Available
Junos OS for EX Series switches, Release 15.1X53-D50 or later
Yes
97