Clear Log; Show Log; Enable Syslog - D-Link DGS-1210/ME series Reference Manual

clear log

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear the log information:

show log

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch history log:
DGS-1210-28P/ME:5# show log
Command: show log
Index Time
-------- ------------------------------
1 03-Jan-2000 17:48:21 %AAA-I-CONNECT: User CLI session for user admin over
telnet , source 10.6.150.34 destination 10.6.41.37 ACCEPTED
2 03-Jan-2000 17:48:02 %AAA-I-DISCONNECT: User CLI session for user admin o
ver telnet , source 10.6.150.34 destination 10.6.41.37 TERMINATED. The Telnet/
SSH session may still be connected.
DGS-1210-28P/ME:5#

enable syslog

Purpose
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To clear the Switch's history log.
clear log
The clear log command clears the Switch's history log.
None.
Only Administrator or operator-level users can issue this command.
DGS-1210-28P/ME:5# clear log
Command: clear log
Success.
DGS-1210-28P/ME:5#
To display the Switch history log.
show log {index <value 1-500> - <value 1-500> | module <string
32>}
The show log command displays the contents of the Switch's
history log.
index <value 1-500> − The number of entries in the history log to
displayed.
module <string 32> − The module of entries in the history log to be
displayed.
None.
To enable the system log to be sent to a remote host.
Log Text
-----------------------------------
147