Cleaning The Document Feeder Rollers - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

Maintenance
2
Wipe the constant velocity transport glass with a soft cloth moistened with water to
remove any dirt, and then wipe it with a soft dry cloth.
Important
Note
3

Cleaning the Document Feeder Rollers

If the document feeder rollers become soiled, smudges may appear on copies, faxes, or
scanned documents and paper jams may occur.
To ensure clean copies at all times, clean the document feeder roller about once a month.
Important
1
Pull up the knob on the document feeder top cover, and open the document feeder top
cover completely.
Note
86
Do not use cleaning agents other than water or neutral detergent.
If you cannot remove dirt easily, gently wipe the glass with a soft cloth moistened with a small amount of
neutral detergent.
Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint or coating on
plastic parts.
Cleaning the machine with an excessive amount of water may cause the machine to malfunction or damage
documents during copying, faxing, scanning, or printing.
When you fully open the cover, it enters a fixed position. Open the cover gently.