Configuration Via Web Browser; Accessing The Web Ui; Web Ui Access Level Management; Saving The Configuration Changes - Grandstream Networks HT801 User Manual

 All entered digit sequences have known lengths - 2 digits for menu option and 12 digits for IP
address. For IP address, add 0 before the digits if the digits are less than 3 (i.e. - 192.168.0.26
should be key in like 192168000026. No decimal is needed).
 Key entry cannot be deleted but the phone may prompt error once it is detected.

Configuration via Web Browser

The HT801 embedded Web server responds to HTTP/HTTP GET/POST requests. Embedded HTML pages
allow a user to configure the HT801 through a web browser such as Google Chrome, Mozilla Firefox and
Microsoft's IE.

Accessing the Web UI

1. Connect the computer to the same network as your HT801.
2. Make sure the HT801 is booted up.
3. You may check your HT801 IP address using the IVR on the connected phone. Please see
HT801 IP Address Via Connected Analogue Phone.
4. Open Web browser on your computer.
5. Enter the HT801's IP address in the address bar of the browser.
6. Enter the administrator's password to access the Web Configuration Menu.
Note: The computer must be connected to the same sub-network as the HT801. This can be easily done
by connecting the computer to the same hub or switch as the HT801.

Web UI Access Level Management

There are two default passwords for the login page:
User Level
End User Level
Administrator Level
The password is case sensitive with maximum length of 25 characters.
When changing any settings, always submit them by pressing the Update or Apply button on the bottom
of the page. After submitting the changes in all the Web GUI pages, reboot HT801 to have the changes
take effect if necessary; most of the options under the Advanced Settings and FXS Port page require
reboot.

Saving the Configuration Changes

After users makes changes to the configuration, pressing the Update button will save but not apply the
changes until the Apply button is clicked. Users can instead directly press the Apply button. We
recommend rebooting or powering cycle the phone after applying all the changes.
Password Web Pages Allowed
123 Only Status and Basic Settings
admin All pages
HT801 User Guide
Obtain
P a g e | 17