Unpacking - Datalogic Magellan 9800i Product Reference Manual

Unpacking

To unpack the unit:
•
•
•
•
•
NOTE
Figure 23. Remove Protective Vinyl
•
Product Reference Guide
Inspect the package for signs of damage that may have occurred during shipping. If dam-
age is found, report it to your carrier immediately.
Lift out the accessory box containing the AC/DC Power Supply, optional Remote Scale
Display and cable (if present), and the Quick Reference Guide.
Remove the Quick Reference Guide and familiarize yourself with the unit's controls and
features. Leave the guide at the checkstand when the installation is complete.
Remove the protective packing and carefully lift the unit from the carton.
the box and all packing material. In the event of failure, the unit must be returned to the factory in
its original packaging
.
Carefully lift off the All Weighs™ Platter as shown in
tive foam pieces securing the weigh mechanism.
For added protection during shipment, the All Weighs™ Platter is covered with a
tight-fitting layer of vinyl as shown in
REMOVED before placing the unit into service.
(Models vary)
Operational Verification
Proceed to the
Figure 33
and remove the protec-
Set the platter back in place.
Figure 23. This vinyl layer MUST BE
Protective vinyl
MUST be removed
from the
before use.
instructions below.
Be sure to save
platter
35