Msi Check Character Calculation - Datalogic Magellan 9800i Product Reference Manual

MSI Check Character Calculation

Enables/disables calculation and verification of optional MSI check characters.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any unused barcodes
on this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
021601(CR)
MSI Check Character Calculation = Enable
Product Reference Guide
If check character calculation is disabled, the risk is increased that a
misread can occur. When disabled, any check characters in a barcode
are treated as data characters.
NOTE
Enter/Exit Programming Mode
021600(CR)
MSI Check Character Calculation = Disable
DEFAULT
353