Expand EAN-8 to EAN-13
Enables/disables expansion of EAN/JAN-8 labels to EAN/JAN-13.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any unused bar codes
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar
code.
DEFAULT
021B01(CR)
Expand EAN-8 to EAN-13 = Enable
Product Reference Guide
Enter/Exit Programming Mode
021B00(CR)
Expand EAN-8 to EAN-13 = Disable
257