Enter/Exit Programming Mode
Keyboard Wedge Quiet Interval
This setting specifies the amount of time to monitor for keyboard activity before breaking the
keyboard connection.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the bar code,
3. Scan the appropriate digits from the
4. The scanner will automatically exit Programming Mode when the appropriate amount of
DEFAULT
220
Keyboard Wedge Quiet
bar codes on this and the facing page to ensure that the scanner reads only the bar code
you intend to scan.
time interval. The selectable range is 001-100, which is the interval in 10-millisecond
increments. Pad all single and double digit numbers with leading zeroes to yield a three-
digit entry (001-100).
Examples:
001 = 10ms
005 = 50ms
040 = 400ms
100 = 1,000ms (1 second)
digits have been scanned
.
Interval. You'll need to cover any unused
Keypad
Appendix C
in
0303(CR)
Set Keyboard Wedge Quiet Interval
Default setting for this feature is:
00A - 100ms
that represent the desired
Magellan™ 9800i Scanner