Ibm Interface Selection - Datalogic Magellan 9800i Product Reference Manual

IBM Interface Selection

Remember to cover any unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
000108(CR)
Interface Type = IBM Port 5B
Product Reference Guide
Great care should be taken to select the correct interface type, since you
can cause damage to the scanner and/or POS terminal by attempting to
change to an incompatible interface. ALWAYS make interface selections
with the host cable DISCONNECTED.
CAUTION
Single cable installations require connection at the POS Terminal (host)
port. The Scale Host port connection is not used for this interface.
NOTE
Enter/Exit Programming Mode
000104(CR)
Interface Type = IBM Port 17
000123(CR)
Interface Type = IBM 4683 Port 9B
167