Chapter 7 Programming; Introduction To Label Programming; Understanding The Basics; Using A Bar Code Mask - Datalogic Magellan 9800i Product Reference Manual

Introduction to Label Programming

The programming bar code labels contained in this manual will allow you to customize and
configure features and settings for your scanner (scanner/scale). To ensure full compatibility and
proper function, use only the programming bar codes in this manual and other product-specific
publications to program scanner features.
This manual has been developed to make it quick and easy for users of all levels to find the
information needed to understand and configure features. The following descriptions will help
you to determine where to go from here.

Understanding the Basics

If you have little or no prior experience with programming using bar code labels, you should
review the first few pages of this section to familiarize yourself with the basics of scanner
programming before performing any changes to your configuration.

Using a Bar Code Mask

The programming bar codes in this manual have been placed as multiples per page. In order to
present them only one at a time to the scanner, a bar code mask is provided on the opposite side
of this page.

Going Green

Thank you for using the bar code mask on the opposite side of this page. This manual has been
formatted to minimize the quantity of pages needed to provide all of the programming bar
codes available for this product.
Product Reference Guide
Chapter 7
Programming
89