Micro Qr Code Length Control - Datalogic Magellan 9800i Product Reference Manual

Micro QR Code Length Control

Fixed Length Decoding —
code if the label length matches one of the configurable fixed lengths.
Variable Length Decoding —
decode a ar code if the label length falls in the range of the configurable minimum and
maximum length.
Configuring Fixed Length Decoding:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the Fixed Length Decoding bar code.
3. Scan the ENTER/EXIT Programming Mode bar code.
4. Set Length 1 to the first fixed length using the
Programming Instructions
5. Set Length 2 to the second fixed length (or to '0000' if there is only one fixed length)
using the
Configuring Variable Length Decoding:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the Variable Length Decoding bar code.
3. Scan the ENTER/EXIT Programming Mode bar code.
4. Set Length 1 to the minimum length using the
Programming Instructions
5. Set Length 2 to the maximum length using the
Programming
DEFAULT
042A01(CR)
Micro QR Code Length Control = Fixed Length
Product Reference Guide
When fixed length decoding is enabled, the scanner will decode a bar
When variable length decoding is enabled, the scanner will
that follow this page.
Micro QR Code Length 1, Length 2 Programming
that follow this page.
Instructions.
Enter/Exit Programming Mode
Micro QR Code Length 1, Length 2
Micro QR Code Length 1, Length 2
Micro QR Code Length 1, Length 2
042A00(CR)
Micro QR Code Length Control = Variable Length
Instructions.
387