Features; Baud Rate - Datalogic Magellan 9800i Product Reference Manual

Enter/Exit Programming Mode
RS-232 Features
RS-232 Baud Rate
This feature selects the baud rate required for sending and receiving data.
To specify the RS-232 Baud Rate:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the desired baud rate from the bar codes below and on the immediately following
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar
001D03(CR)
RS-232 Baud Rate = 2400
001D01(CR)
RS-232 Baud Rate = 9600
180
NOTE
pages. You'll need to cover any unused bar codes on this and the facing page to ensure that
the scanner reads only the bar code you intend to scan.
code.
Single cable interfaces are limited to Baud Rate
selections up to 19200. They cannot communicate
at Baud Rates of 38400 and up.
001D04(CR)
RS-232 Baud Rate = 1200
001D02(CR)
RS-232 Baud Rate = 4800
001D00(CR)
RS-232 Baud Rate = 19200
DEFAULT
Magellan™ 9800i Scanner