Standard 2 Of 5 Correlation - Datalogic Magellan 9800i Product Reference Manual

Enter/Exit Programming Mode

Standard 2 of 5 Correlation

Enables/disables character correlation for Standard 2 of 5.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any unused barcodes
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
059301(CR)
Standard 2 of 5 Correlation = Enable
366
on this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
Mode bar code.
059300(CR)
Standard 2 of 5 Correlation = Disable
Magellan™ 9800i Scanner