Code 39 Full Ascii - Datalogic Magellan 9800i Product Reference Manual

Enter/Exit Programming Mode

Code 39 Full ASCII

Enables/disables the ability of the scanner to translate to Code 39 full ASCII labels.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any unused barcodes
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
022F01(CR)
Code 39 Full ASCII = Enable
302
on this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
Mode bar code.
022F00(CR)
Code 39 Full ASCII = Disable
Magellan™ 9800i Scanner