Scale Diagnostics Mode
Use this feature to allow or disallow the ability of an operator to initiate the advanced feature,
scale diagnostics.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any unused bar codes
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar
code.
DEFAULT
049F01(CR)
Scale Diagnostics Mode = Enable
Product Reference Guide
Enter/Exit Programming Mode
049F00(CR)
Scale Diagnostics Mode = Disable
133