Datalogic Magellan 9800i Product Reference Manual page 288

Enter/Exit Programming Mode
P2 Addon Minimum Read
This feature specifies the minimum number of times a P2 addon must decode before it is
marked valid.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the barcode representing the desired option on this and the following page. You'll
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar
DEFAULT
005F03(CR)
P2 Addon Minimum Read = 3
005F05(CR)
P2 Addon Minimum Read = 5
276
need to cover any unused barcodes on facing pages to ensure that the scanner reads only
the barcode you intend to scan.
code.
005F02(CR)
P2 Addon Minimum Read = 2
005F04(CR)
P2 Addon Minimum Read = 4
005F06(CR)
P2 Addon Minimum Read = 6
Magellan™ 9800i Scanner