Enter/Exit Programming Mode
Micro PDF 417 128 Emulation
This feature specifies which AIM ID to use for Micro PDF 417 labels when performing Code
128 or EAN 128 emulation.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the bar code below for the desired setting. You'll need to cover any unused bar codes
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar
DEFAULT
032701(CR)
Micro PDF 417 128 Emulation = Code 128 / EAN128 AIM ID
and label type when emulating EAN128 or Code 128
382
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
code.
032700(CR)
Micro PDF 417 128 Emulation = Micro PDF AIM ID and
label type when emulating EAN128 or Code 128
Magellan™ 9800i Scanner