Enter/Exit Programming Mode
MSI Enable
Enables/disables the ability of the scanner to decode MSI labels.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any unused barcodes
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
00C101(CR)
MSI = Enable
352
on this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
Mode bar code.
00C100(CR)
MSI = Disable
Magellan™ 9800i Scanner