Standard 2 Of 5 Length Control - Datalogic Magellan 9800i Product Reference Manual

Standard 2 of 5 Length Control

This feature specifies whether variable-length or fixed-length decoding will be set for Standard 2
of 5.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the barcodes below. You'll need to cover any unused barcodes on
this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
DEFAULT
049701(CR)
Standard 2 of 5 Length Control = Fixed Length
Product Reference Guide
Enter/Exit Programming Mode
049700(CR)
Standard 2 of 5 Length Control = Variable Length
367