Eas Deactivation Duration - Exception - Datalogic Magellan 9800i Product Reference Manual

Enter/Exit Programming Mode
EAS Deactivation Duration — Exception
Specifies the amount of time EAS deactivation is operative upon pushing the EAS Exception
Button.
To set the EAS Deactivation Duration — Exception:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the bar code,
3. Scan the appropriate digits from the
Examples:
4. The scanner will automatically exit Programming Mode when the appropriate amount of
DEFAULT
158
This setting pertains only to units configured for EAS Coupled Mode. Refer-
EAS Mode
ence the
Decoupled EAS operation. Also reference
NOTE
Set EAS Deactivation Duration — Exception
to cover any unused bar codes on this and the facing page to ensure that the scanner reads
only the bar code you intend to scan.
duration. The selectable range is 1-255, which is the duration in 10-millisecond incre-
ments. Pad all single and double digit numbers with leading zeroes to yield a three-digit
entry (001-255).
005 = 50ms
040 = 400ms
250 = 2,500ms (2.5 seconds)
digits have been scanned.
description for more information about Coupled and
EAS Retry
Keypad Appendix C
in
0587(CR)
Set EAS Deactivation Duration — Exception
Default setting for this feature is:
100 - 1 Second
Count.
below. You'll need
that represent the desired
Magellan™ 9800i Scanner