In-Store Printed Label Minimum Read - Datalogic Magellan 9800i Product Reference Manual

In-Store Printed Label Minimum Read

This feature specifies the minimum number of consecutive In-Store Printed Label decodes
before is accepted as good read.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any unused bar codes
on this and the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
008502(CR)
In-Store Printed Label Minimum Read = 2
008504(CR)
In-Store Printed Label Minimum Read = 4
Product Reference Guide
Enter/Exit Programming Mode
008501(CR)
In-Store Printed Label Minimum Read = 1
DEFAULT
008503(CR)
In-Store Printed Label Minimum Read = 3
263