Physical Parameters; Scanning; Eas Tag Deactivation System - Datalogic Magellan 9800i Product Reference Manual

Physical Parameters

This section provides specifications for performance, environmental and electrical parameters.
Reference the second section of this manual,
measurements of all models and some accessories.

Scanning

A scan zone
the Top Down Reader (TDR), if that optional feature is present. Separate projections from each
of these sources combine to form a zone where bar code labels are read. Refer to the
and Maintenance
Figure 4. Scan Zone
Horizontal Scan Zone
1
Vertical Scan Zone
2
Optional TDR Scan Zone
3

EAS Tag Deactivation System

Scanners can be ordered from the factory to include an optional EAS (Electronic Article
Surveillance) deactivation system. Two different EAS system types are available: Checkpoint
and Sensormatic
The AMB-9010 deactivation system requires connection as shown in
Chapter 3, "Deactivating Security Labels"
Contact
EAS controller box. Additional details about this system can be referenced under the following
topics:
• Chapter 3, "Deactivating Security Labels"
• Chapter 7, "EAS Features — Sensormatic"
1. Checkpoint is a registered trademark of Checkpoint Systems, Inc
2. Sensormatic is a registered trademark of Sensormatic Electronics Corporation.
Product Reference Guide
(Figure 4) exists in the area between the horizontal and vertical scan windows, and
section of this manual for more details about the topic:
1
2
.
Technical Support for information about installation of the Sensormatic
Site Preparation and
3
2
4
Combined Scan Zone
4
Move items through the center of the hori-
5
zontal window for best scan coverage
for more information about its use.
Installation, for physical
Operation
Scanning Items.
5
1
Figure 2a. Reference
®
AMB-9010
7