DataBar Expanded Length 2
Length 2 is the maximum label length if in variable length mode, or the second fixed length if in
fixed length mode. Length includes the barcode's data characters only.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
unused barcodes on this and the facing page to ensure that the scanner reads only the bar-
code you intend to scan.
3. Scan the appropriate digits from the
label length. The selectable range for this option is 00 to 74. Pad all single digit numbers
with a leading zero to yield a two-digit entry (00-74).
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
DEFAULT
Product Reference Guide
When in Fixed Length mode, if Length 2 is set to the value of 00 (zero),
then only Length 1 will apply.
NOTE
Set DataBar Expanded Length 2
Enter/Exit Programming Mode
below. You'll need to cover any
Keypad
Appendix C
in
04BF(CR)
Set DataBar Expanded Length 2
Default setting for this feature = 74
that represent the desired
297