Datalogic Magellan 9800i Product Reference Manual page 37

Display Clearance —
the scanner's read zones. Adjustment must be made depending upon whether or not there is a
Top Down Reader (TDR) installed.
NO TDR — POS display placement for scanners not having a TDR must not encroach the
With TDR — If a POS display is to be installed above the scanner in conjuction with an
Figure 11. Display Clearance With No TDR
Figure 12. Display Clearance With TDR
Product Reference Guide
Clearance must be allowed so that a POS display will not interfere with
scan zone formed by the horizontal and vertical windows. The bottom of the display must
be no lower than the 30° line shown in
the bonnet, 6 cm above the weigh platter.
installed TDR (long or short model), the face of the display can be no closer than 2 cm
behind the line shown in
ner's bonnet.
MUST be ≥ 2 cm behind this line
Figure 11, which projects from the front edge of
Figure 12, which represents the frontmost edges of the scan-
~30° minimum
6 cm
D
S
P
L
A
Y
Face of Display
2 cm
D
I
S
P
L
A
Y
I
25