Global Suffix - Datalogic Magellan 9800i Product Reference Manual

Global Suffix

This feature applies to RS-232 interfaces (Standard, Wincor-Nixdorf, and Single Cable). It
specifies the suffix that is added to end of a label transmission. Three standard options are
available below. Contact your dealer for other alternate settings for this feature.
• No Global Suffix
• CR — Carriage Return
• CR LF — Carriage Return, Line Feed
To set the Global Suffix:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar
code.
031E0D00(CR)
Global Suffix = CR
Product Reference Guide
Enter/Exit Programming Mode
031E00(CR)
Global Suffix = No Global Suffix
DEFAULT
031E0D0A00(CR)
Global Suffix = CR LF
227