Enter/Exit Programming Mode
DataBar Limited EAN-128 Emulation
Enables/disables EAN 128 emulation for DataBar Limited.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any unused barcodes
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
036301(CR)
DataBar Limited EAN-128 Emulation = Enable
288
on this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
Mode bar code.
036300(CR)
DataBar Limited EAN-128 Emulation = Disable
Magellan™ 9800i Scanner