Codabar Stitching - Datalogic Magellan 9800i Product Reference Manual

Codabar Stitching

Enables/disables stitching for Codabar labels. When parts of a Codabar barcode are presented to
the scanner with this feature enabled, the barcode parts will be assembled by the scanner's
software, and the data will be decoded if all barcode proofing requirements are met.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the barcodes below. You'll need to cover any unused barcodes on
this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
DEFAULT
06AD01(CR)
Codabar Stitching = Enable
Product Reference Guide
Enter/Exit Programming Mode
06AD00(CR)
Codabar Stitching = Disable
343