Setup; Unpacking; Setting Up The Reader - Datalogic QuickScan I QD24 Series Product Reference Manual

Unpacking

Check carefully to ensure the reader and any accessories ordered are present and undamaged. If any damage
occurred during shipment, contact Datalogic Technical Support. Information is shown on
KEEP THE PACKAGING. Should the unit ever require service, it should be returned in its original shipping
container.

Setting Up the Reader

ollow the steps provided in this section to connect and get your reader up and communicating with its host.
1. Begin by Installing the Interface Cable
2. Go to Interface Selection
3. Configure Interface Settings
4. Go to Configuring Other Features
Product Reference Guide
and set the desired interface.
(only if not using factory settings for that interface).
(if modifications are needed from factory settings).
Chapter 2

Setup

page 2.
5