Ttl - Datalogic Magellan 9800i Product Reference Manual

RS-232 TTL
Specifies whether RS-232 interface provides TTL levels on the output pins TxD and RTS.
Choices are:
• Normal RS-232 levels
• TTL levels
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the bar code below which represents the desired setting for this feature. You'll need to
cover any unused bar codes on this and the facing page to ensure that the scanner reads
only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar
code.
DEFAULT
028501(CR)
RS-232 TTL = TTL Levels
Product Reference Guide
Enter/Exit Programming Mode
028500(CR)
RS-232 TTL = Normal RS-232 levels
189