Setup; About The Reader; Unpacking - Datalogic QuickScan I QM2131 Product Reference Manual

About the Reader

One distinctive feature offered by the reader is a very wide scan angle which
can read long linear bar codes, such as utility bills. Whether used in Single Trig-
ger or Continuous Mode, the ergonomic design of the reader will help to pro-
mote comfortable handling during extended periods of use.
The reader can communicate using the following interfaces:
RS-232:
RS-232 host.
RS-232 OPOS:
Keyboard Wedge (KBW) :
scanned data as keystrokes and supports several international keyboards (for
the Windows
USB:
Select to communicate either by USB OEM, USB COM STD, or USB Keyboard
interface types by scanning the appropriate interface type bar codes available in
this manual. The default interface is USB-KBD for Wedge models (7230) and
USB-OEM for IBM models (7210).

Unpacking

Check carefully to ensure the reader and any accessories ordered are present
and undamaged. If any damage occurred during shipment, contact Current ver-
sions of the Product Reference Guide (PRG), Quick Reference Guide (QRG), the
Datalogic Aladdin™ Configuration application, software/firmware and any addi-
tional manuals, instruction sheets and utilities for this product can be down-
loaded from the website listed on the back cover of this manual. Alternatively,
printed copies or product support CDs can be purchased through your Data-
logic reseller.Technical Support on page 2.
KEEP THE PACKAGING. Should the unit ever require service, it should be
returned in its original shipping container.
Product Reference Guide
The reader can communicate with a standard or Wincor-Nixdorf (W-N)
This interface is used for OPOS/UPOS/JavaPOS systems.
When connected using this interface, the host interprets
®
environment). See "Country Mode" on page 42 for a full listing.
Chapter 2

Setup

3