MSI Check Character Transmission
Enables/disables transmission of optional MSI check characters.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any unused barcodes
on this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
00BE01(CR)
MSI Check Character Transmission = Enable
Product Reference Guide
This feature applies only when
enabled. This item is ignored when the advanced feature, Full Label
Edit, is enabled.
NOTE
Enter/Exit Programming Mode
MSI Check Character Calculation
00BE00(CR)
MSI Check Character Transmission = Disable
DEFAULT
is
355