Ack Nak Error Handling - Datalogic Magellan 9800i Product Reference Manual

Enter/Exit Programming Mode
RS-232 ACK NAK Error Handling
This item specifies the method the scanner will use to handle errors detected while waiting to
receive the ACK character from the host. Errors include unrecognized host commands and
communication errors such as parity or framing errors.
•
•
•
To select the option for RS-232 ACK NAK Error Handling:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the desired option from the bar codes below. You'll need to cover any unused bar
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode bar
DEFAULT
032301(CR)
RS-232 ACK NAK Error Handling = Assume ACK
200
Ignore Errors (recommended setting)
Assume ACK (risk of lost label data)
Assume NAK (risk of duplicate label)
codes on this and the facing page to ensure that the scanner reads only the bar code you
intend to scan.
code.
032300(CR)
RS-232 ACK NAK Error Handling = Ignore Errors
032302(CR)
RS-232 ACK NAK Error Handling = Assume NAK
Magellan™ 9800i Scanner