Table of Contents
Advertisement
Enter/Exit Programming Mode
Wedge Quiet Interval
This option specifies the amount of time to look for keyboard activity before
the scanner breaks the keyboard connection in order to transmit data to host.
The selectable range for this feature is from 0 to 990ms in 10ms increments.
See
"Wedge Quiet Interval"
instructions.
NOTE
Select Wedge Quiet Interval Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
42
This feature applies ONLY to the Keyboard Wedge interface.
$CKBQI
10 = Quiet Interval of 100 ms
DEFAULT
on page 226 for more detailed programming
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from the
Alphanumeric characters in
representing your desired character(s). End by scanning
the ENTER/EXIT bar code again.
Wedge Quiet Interval
Appendix D, Keypad
~
CANCEL
Heron™ HD3130
Advertisement
Table of Contents
