Wedge Quiet Interval - Datalogic Cobalto CO5330 Product Reference Manual

Wedge Quiet Interval

Wedge Quiet Interval
This option specifies the amount of time to look for keyboard activity before the scanner
breaks the keyboard connection in order to transmit data to host. The selectable range for this
feature is from 0 to 990ms in 10ms increments. See
more detailed programming instructions.
NOTE
Select Wedge Quiet Interval Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
This feature applies ONLY to the Keyboard Wedge interface.
$CKBQI
DEFAULT
"Wedge Quiet Interval" on page 226
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from the
Alphanumeric characters in
senting your desired character(s). End by scanning the ENTER/
EXIT bar code again.
10 = Quiet Interval of 100 ms
Enter/Exit Programming Mode
Appendix D, Keypad
repre-
~
CANCEL
for
39