Reading Parameters; Aiming System; Good Read Green Spot Duration - Datalogic Gryphon GD4500 Quick Reference Manual

General purpose corded handheld area imager bar code reader

Hide thumbs Also See for Gryphon GD4500:

Table of Contents

Reading Parameters

READING PARAMETERS

Move the reader toward the target and center the aiming

pattern and illumination system to capture and decode

the image. See

"" on page 4

for more information.

The aiming system will briefly switch off after the acquisi-

tion time, and if no code is decoded will switch on again

before the next acquisition. The illuminator will remain on

until the symbol is decoded.

As you read code symbols, adjust the distance at which

you are holding the reader.

A number of options for customizing control of the Aiming

System are available. See the Gryphon™ I GD4500 PRG for

more information and programming bar codes.

Successful reading can be signaled by a good read green

spot. Use the bar codes that follow to specify the duration

of the good read pointer beam after a good read.

GOOD READ GREEN SPOT DURATION

ENTER/EXIT PROGRAMMING MODE

Disable

★ Short (300 ms)

QUICK REFERENCE GUIDE

Table of Contents

Show Quick Links

Table of Contents