Reading Parameters; Aiming System; Good Read Green Spot Duration - Datalogic Gryphon GFS4500 Quick Reference Manual

Fixed mount area imager bar code reader

Hide thumbs Also See for Gryphon GFS4500:

Table of Contents

Reading Parameters

READING PARAMETERS

Move the reader toward the target and center the aiming

pattern and illumination system to capture and decode

the image. The aiming system will briefly switch off after

the acquisition time, and if no code is decoded will switch

on again before the next acquisition. The illuminator will

remain on until the symbol is decoded.

A number of options for customizing control of the Aiming

System are available. See the Gryphon I GFS4500 PRG for

more information and programming bar codes.

Successful reading can be signaled by a good read green

spot. Use the bar codes that follow to specify the duration

of the good read pointer beam after a good read.

GOOD READ GREEN SPOT DURATION

ENTER/EXIT PROGRAMMING MODE

Disable

★ Short (300 ms)

GRYPHON™ I GFS4500

Table of Contents