Clear Current Batch - Sam4s SPS-300 Series Operator's And Programming Manual

SD Card Operation
Utilities in this program include:
Flash ROM update can also be done by SD card or through a serial connection to a PC.
Note: The SD slot is located inside the printer compartment. On the SPS-320, the SD
slot is located to the right of the printer mechanism; on the SPS-340 and 345, the SD slot
is located to the rear of the receipt printer.) Remove the security screw to access the
slot. See page 20 for detail.
136 • S-Mode Programming

Program Backup & Loading

Report Backup

Pre-Image Logo Loading & Backup

Post-Image Logo Loading & Backup
1. At the S control lock position menu, press 9 for SD Card Operation. The SD
CARD OPERATION screen displays:
SD CARD OPERATION
1. PROGRAM BACKUP
2. PROGRAM LOAD 3. REPORT BACKUP
4. PRE-IMAGE LOGO LOAD
5. PRE-IMAGE LOGO BACKUP
6. POST-IMAGE LOGO LOAD
7. POST-IMAGE LOGO BACKUP
8. EACH PROGRAM LOAD
2. Insert the SD card in the register's SD slot.
3. Enter the digit (1-8) corresponding to the function you wish to access. A
complete explanation of each function follows.
Note: Option "8", EACH PROGRAM LOAD was added at firmware version
1.038. This option allows you to select an individual program segment to load.
Program components you can load individually include:
PLU
Tax
Print Options
Clerk
Report Logo
Misc.
PLU Lookup
Group
System Options
Function Key
Logo Desc.
Stock
Macro
Mix & Match
SAM4s SPS-300 Operator's & Programming Manual v1.34