Report Table - Sam4s SPS-300 Series Operator's And Programming Manual

Register Print Format
You can designate the SPS-320 printer to print either a receipt, or a sales journal. If you
select journal format, the preamble/postamble will not print. If you select receipt format, the
preamble/postamble will print and the receipt will feed sufficiently for paper tear-off.
Stop Register Printing
You can turn the register printer to an on or off condition. In the off condition, transactions
will not be printed, but reports will continue to print, if requested.
Note: When the receipt is off, a receipt may be printed after the sale by pressing CASH after the
102 • Management Functions
1. From the MANAGER MODE menu press 3 to set the receipt format:
REG. PRINTING FORMAT
REGISTER PRINTING IS
CURRENTLY RECEIPT
TO SET TO JOURNAL
PRESS YES AND ENTER
2. The REG. PRINTING FORMAT screen displays. Press the YES/NO key to
toggle from receipt to journal format. The screen will display the current printer
format. Press the YES/NO key and then CASH to set the new format.
1. From the MANAGER MODE menu press 4 to set receipt printing on or off, or
press 5 to set journal printing to on or off (SPS340/345 only):
REG. PRINTING ON/OFF
REGISTER PRINTING
IS CURRENTLY ON
TO TURN OFF
PRESS YES AND CASH
2. The REG. PRINTING ON/OFF or JOURNAL PRINTING ON/OFF screen
displays. Press the YES/NO key to toggle from receipt on to receipt off. The
screen will display the current printing status. Press CASH to set the new
format.
SAM4s SPS-300 Operator's & Programming Manual v1.34