S-Mode Programming; Overview - Sam4s SPS-300 Series Operator's And Programming Manual

Field
TYPE
IRC
SAM4s SPS-300 Operator's & Programming Manual v1.34
3. When a report is selected, the Z REPORT OPTIONS screen displays:
Z REPORT OPTIONS
RPT# :
1. TYPE
0:DAILY 1:PERIOD
2. 0:PRINT
3. IRC
0:STANDALONE
1:ALL 2:SELECT
4. Select the TYPE (DAILY or PERIOD and the IRC configuration. Refer to the
explanations in the table below. Press CASH after each selection. After the last
selection, the report will start.
5. If IRC is SELECT, then the register selection displays:
Z REPORT OPTIONS
RPT# :
1. TYPE :
0:DAILY 1:PERIOD
2. 0:PRINT
3. IRC
0:STANDALONE
# 1Y 2N 3N 4N 5N 6N 7N 8N

6. Press the YES/NO key at each register # to select whether you wish to include
each register in the consolidated report. Press CASH after each selection. After
the last selection, the report will start.
FINANCIAL
FINANCIAL
Description
Select Z1 or Z2 if available for the selected report.
Select STANDALONE, ALL, or SELECT if available
for the selected report. If SELECT, the screen prompts
for selection of registers - the screen will initially show
the registers available from the from/to IRC register
programming, for example if the IRC range is from 1
to 3, then the selection will default to:
1Y 2N 3N 4N 5N 6N 7N 8N
0

0
0
0
0
2
Z Mode • 111