Sam4s SPS-300 Series Operator's And Programming Manual page 204

CHARGE 1-8 Key Program Notes
Option
DESC
HALO
AMOUNT TEND
COMP.
ALLOW
OVERTENDERING
IN MANAGER
CONTROL MODE
ONLY
DISABLE UNDER
TEND.
DOES DRAWER
OPEN
ALLOW OVER
TEND.
NON-ADD # COMP.
EXEMPT TAX 1
EXEMPT TAX 2
EXEMPT TAX 3
EXEMPT TAX 4
COMPULSORY
VALIDATION
CONNECT EFT
ALLOW
UNDERTENDERING
IN MANAGER
CONTROL MODE
ONLY
SELECT (1:CREDIT
2:DEBIT, 3:GIFT,
4: GIFT NSF
5: CASH BENEFIT)
SHOW TIP ON:
0:REG, 1:PINPAD,
2:PRINT TIP LINE
ONLY
204 • Program Mode Programming
Entry Description
Alpha You can program a unique descriptor. The default
numeric descriptors are CHARGE 1-8.
12 character
7 digit You can limit errors by setting the maximum amount that
amount can be tendered. "0" means that there is no entry limit.
Y or N Select Y if you want to force the operator to enter the
tendered amount and let the register calculate the change.
Y or N NOTE: Option changed at version 1.046 or later. Before
v1.046, this selection controlled both over and under tenders.
When selected, over tendering is allowed only in the X
control lock position.
Y or N Select Y if you do not want the operator to tender less than
the amount of the sale.
Y or N Select N if you do not want the drawer to opened with this
key.
Y or N Select Y if you wish to allow tender greater than the amount
of the sale.
Y or N Select Y if you wish to enforce the entry of a non-add
number prior to tendering.
Select Y to exempt the appropriate tax automatically when
Y or N
finalized with this key.
Y or N Choose Y to enforce validation if an optional printer with
validation capability is connected to an RS-232C port.
Y or N Select Y if the DataTran is connected.
Y or N NOTE: Option added at version 1.046 or later. Before
v1.046, the selection on page 1 controlled both over and
under tenders. When selected here, under tendering is
allowed only in the X control lock position.
1, 2, 3, 4 (Only used when Send To EFT = Y)
Gift NSF indicates that a Gift card with a value less than the
amount of the sale will be accepted as an under tender.
(Applies to DataTran operations only.) Cash Benefit
function added at version 1.034.
0, 1, 2 Used only with EMV enabled applications.
SAM4s SPS-300 Operator's & Programming Manual v1.34